MT-ILC-FF / 100 N–10 kN
Female-to-Female Threaded Inline Load Cell
A compact female-to-female in-line load cell connects two mating studs. Review thread engagement, shoulder contact and alignment as one mechanical stack.
Request drawing & quotation ↗Test frames · assembly lines · push-pull rods
Measure the force between two threaded rods.
Studs must engage without bottoming out or loading the cable exit. Share the complete stack drawing, including rod ends, jam nuts and any alignment joints.
Three inputs for the first drawing review
- Female thread depth, pitch and mating stud length
- Tension/compression range and fixture stiffness
- Alignment joint, mounting preload and side-load exposure
Family selection ranges follow the project catalog plan. Dimensions, accuracy, material and IP rating are confirmed for the quoted part.
PART NUMBER BUILDER
Configure a reference for the engineering review.
Select a capacity, thread and output to carry into the request below. Mixed threads require both ends in the RFQ. This reference is subject to drawing approval.
ENGINEERING RFQ / SAMPLE REQUEST
Send the load case.
Define the interfaces.
Include both thread ends, working and peak force, available space and the signal your controller expects.
Company and university email domains are preferred. Prototype and research inquiries are welcome.
inquiry@inlineloadcell.com ↗