MT-ILC-MF / 50 N–5 kN
Male-to-Female Rod-End Inline Load Cell
A male-to-female inline load cell places the force measurement in the axial load path. Start with the actuator rod thread, mating attachment and available installation length.
Request drawing & quotation ↗Electric cylinders · press-fit monitoring
Put force feedback at the actuator rod end.
Confirm the actuator rod gender and both mating threads. Specify the load cell length between shoulders and the wrench clearance before freezing the rod-end design.
Three inputs for the first drawing review
- Rod-end thread and required engagement on both ends
- Continuous force, peak force and axial alignment
- Remaining stroke, stack length and cable exit clearance
Family selection ranges follow the project catalog plan. Dimensions, accuracy, material and IP rating are confirmed for the quoted part.
PART NUMBER BUILDER
Configure a reference for the engineering review.
Select a capacity, thread and output to carry into the request below. Mixed threads require both ends in the RFQ. This reference is subject to drawing approval.
ENGINEERING RFQ / SAMPLE REQUEST
Send the load case.
Define the interfaces.
Include both thread ends, working and peak force, available space and the signal your controller expects.
Company and university email domains are preferred. Prototype and research inquiries are welcome.
inquiry@inlineloadcell.com ↗